- Repairs for bent or cut panels, leaning posts, missing bolts, rust and gates that drag.
- Providers can repair a clearview fence whoever installed it, as long as matching parts are available.
- Photos of the damage get you a faster, more accurate quote.
Send photos of the damage and the panel height.
Compare QuotesCommon Repairs
| Problem | Usual cause | Typical fix |
|---|---|---|
| Bent, cut or holed panel | Vehicle impact, break-in attempt, fallen tree | Replace the panel with a matching size and mesh |
| Leaning post | Shallow footing, loose sand, wind, impact | Dig out and re-set in a new concrete footing |
| Loose or missing bolts | Vibration, theft of fixings, poor original install | Refit clamp bars and security bolts |
| Rust spots | Scratched coating, salt air, untreated cut ends | Wire brush, zinc-rich primer and touch-up paint |
| Gate sagging or dragging | Worn hinges, moved post, damaged track | Adjust or replace hinges, re-set post, service rollers |
| Gap under the fence | Erosion, digging animals, uneven ground | Concrete plinth, kicker plate or infill panel |
Repair or Replace?
- Repair when damage is limited to a few panels or posts and the rest of the fence is sound.
- Replace a run when rust has eaten through wire or posts along a whole section, or matching panels are no longer made.
- Upgrade when the fence keeps being breached. It may need a taller or tighter mesh rather than another patch.
Replacement panels, sizes and compatibility are covered on clearview fence panels. If you only need the parts, see clearview fencing suppliers.
Repair Prices
| Item | Ballpark price |
|---|---|
| Call-out fee (often credited against the job) | R200 - R500 |
| Small job, about 3 - 4 hours labour | R600 - R800 |
| Replace a damaged or fallen section | R900 - R2,500 |
| Rebuild a run of clearview fencing | R1,000 - R1,300 per metre |
| Replacement posts, supply only | R350 - R650 each |
Ballpark figures, not quotations. Indicative 2026 ranges from published South African fencing price guides and retailer listings, excluding VAT unless stated. Most are national or Gauteng figures, so Cape Town quotes can land higher or lower. A site visit and a written quote set the actual price.
What Affects the Cost
- Matching parts. Odd heights, apertures or colours may need special orders.
- Number of posts. Re-setting posts takes far longer than swapping a panel.
- Finish matching. Powder-coated repairs cost more and colours can differ slightly from weathered panels.
- Access. Gardens, pools or neighbours' property on the other side slow the work.
- Urgency. Same-day or weekend work to secure a breached boundary can cost more.
Maintenance That Prevents Repairs
- Check bolts and clamp bars once a year and after any impact.
- Touch up scratches in the coating before rust spreads.
- Rinse coastal fences with fresh water now and then to remove salt.
- Keep creepers and hedges off the mesh.
- Lubricate gate hinges, rollers and locks, and keep sliding tracks clear of sand.
Cape Town Conditions
Salt air near the coast attacks any break in the coating, so small scratches matter more there. Winter fronts bring down branches onto fences, and the south-easter pushes sand into sliding gate tracks. Posts in loose sandy ground are the most common cause of leaning sections.
What to Include in Your Enquiry
- Photos of the damage and of the whole run.
- Panel height and width, and the mesh opening size if you can measure it.
- Colour or finish: galvanised, black, green or other.
- How many panels and posts are affected.
- Whether the boundary is currently open and needs securing quickly.
How Comparing Quotes Works
- Send one enquiry. Describe the job, the property and your suburb.
- Providers respond. Relevant independent providers covering your area contact you to ask questions, visit or quote.
- Compare and choose. Compare specification, inclusions, timing and price, then appoint whoever suits you, or nobody.
Ask whether each repair quote uses new matching panels or straightens the old ones.
Send one enquiry through Clearview Fencing Cape Town and compare quotes from relevant local providers.
Repair Questions
Can a bent clearview panel be straightened?
Minor bends sometimes can, but straightened mesh is weaker and looks uneven. A replacement panel is usually the better fix.
Will a new panel match my old fence?
Only if height, width, mesh opening and finish match. Measure the old panel and send photos.
Why is my fence leaning?
Usually a shallow or undersized footing, loose sand, or impact damage. The post needs re-setting in new concrete.
Can rust on a clearview fence be fixed?
Surface rust can be cleaned and treated. If the wire or posts have rusted through, replacement is needed.
Do I need the original installer for repairs?
No. Any competent provider can repair it if matching parts are available.
Related Pages
Clearview Fencing Cape Town is a free quote-comparison service. Supply, installation and repair work is quoted and carried out by independent providers, and your agreement is with the provider you appoint. Ask each one for a written, itemised quote, what is and is not included, and their payment terms before paying anything.
Clearview Fencing Repairs Cape Town. Send photos once and compare repair quotes.
Compare QuotesGet Clearview Repair Quotes
Send photos and details and relevant local providers will quote for the repair.
Client Reviews
Powered by leaderr
